Fermentation Equipment

Stir Plate 2000

The Stir Plate 2000 is designed for smaller starters as small as 125 ml, but will still spin up to a 2000 ml flask. This stir plate features PWM Technology, Low Power Consumption, Tough High Impact Polystyrene Housing. Includes power supply and two 1"...

1 Inch Stir Bar

Replacement stir bar, because they’re small...

The OxyWand™ Oxygenation Kit - 0.5 Micron

The OxyWand™ Oxygenation Kit - 0.5 Micron This Oxygenation Kit pumps pure oxygen into your cooled wort using a disposable oxygen tank and stainless steel diffusion stone. Takes around 1-2 minutes of operation to achieve adequate oxygen levels,...

5000 ML Erlenmeyer Flask

This 5000 ML Erlenmeyer flask is perfect for making large starters for high gravity or lager beers. Borosilicate glass can tolerate rapid temperature change allowing for wort to be boiled in the flask and then quickly cooled down. Can be put on an open...

FermWrap

Use tape to adhere this flexible heating wrap directly to your fermenter. Depending on your configuration and insulation, you can increase the temperature of your ferment from 5-20 degress Fahrenheit. For best results, we recommend a temp controller and...

Diffusion Stone - .5 Micron

Diffusion Stone - .5 Micron The .5 Micron stone is more commonly used for carbonation however it can be used pre-fermentation to oxygenate your wort.  Not the ideal choice if you want to aerate with an aquarium pump but works well with oxygen tank...

Yeast Starter Kit

Pitching the proper amount of healthy yeast cells is one of the most important things a brewer can do to improve his or her beer. Many yeast manufactures recommend only one vial or pack of their yeast for 5 gallons, but most professional brewers agree...

Diffusion Stone with Flare Threads - 2 Micron

Diffusion Stone - 2 Micron Use this 2 micron oxygen stone with an oxygen source or aeration pump to provide your yeast with oxygen pre-fermentation. The stone is threaded instead of barbed so you can combine it with a swivel nut fitting to...

Aeration System with Pump

Aeration in the early stages of fermentation is essential for cell growth. Proper cell reproduction leads to healthy, active fermentation with reduction of off flavors. Aerate wort for 30 minutes after it has been chilled and before yeast has been...

1 Gallon Glass Jug

1 Gallon Glass Screw Top Jug These glass gallon jugs have many uses. Use them as a fermenting jug and split up a five gallon batch of home brew for experimentation with hops, fruit, or yeast.  They can be used for secondary fermentation of...

Anvil 7.5 Gallon Bucket Fermenter Cooling System

Cooling System for 7.5 Gallon Fermenting Bucket Temperature control is the cornerstone of producing top quality beer. Esters and off flavors can be control by closely monitoring fermentation temperatures. Anvil Brewing makes it easy...

No 2 Drilled Stopper

No. 2 Drilled Rubber Stopper Moulded stopper made of food grade material free from BPA. Stoppers provide an air-tight seal when proper size is used. They stick perfectly to Glass and PET, even when they are wet. Comes with moulded hole for airlock...